With the paintwork looking better, it was now time to have Mike remove the dent.

It was always going to be a difficult dent to remove, but we never realized that it would be difficult to get to too. In order to remove dents they are pressed from behind using metal levers. Unfortunately it is not always possible to get behind them if struts and braces are in the way - at the very least you have to remove the trim. In this case Mike removed the rear light but this was not good. Then he stripped the trim in the boot area but this didn't wok either.

1|2|3|4|5

Paintless Dent Repair
PDR can remove small dents and dings which devalue your car.